Product Instructions

Foxy Massager

1. Product Overview

The Foxy Massager is a handheld aluminium massage tool designed to help massage the hands, fingers, forearms and other external muscle groups. The removable stainless steel ball is retained using a permanent magnet, allowing easy cleaning and maintenance.

2. Intended Use

The Foxy Massager is intended for external massage of muscles and soft tissue to help relieve tension and discomfort.

For external use only.

This product is not a medical device.

3. Safety Information

  • This product is not a toy.
  • Keep out of reach of young children.
  • The removable ball presents a choking hazard.
  • Do not place the ball in the mouth.
  • Do not use on broken, infected or irritated skin.
  • Stop use immediately if pain, discomfort or skin irritation occurs.
  • Do not modify the product.
  • Inspect the product before each use.

4. Foreseeable Misuse

  • Do not use for any purpose other than massage.
  • Do not throw or strike the product.
  • Do not use if damaged.
  • Do not allow children to play with the removable ball.

5. Cleaning & Maintenance

To maintain smooth rolling performance:

  1. Remove the ball from the housing.
  2. Wipe the bearing and ball with a clean cloth.
  3. Remove any dirt, chalk or residue.
  4. Ensure all parts are completely dry.
  5. Reinsert the ball into the housing.

Climbing chalk can reduce rolling performance and should be cleaned away regularly.

Do not use abrasive cleaners or aggressive chemicals.

6. Storage

Store in a clean, dry location away from excessive moisture, corrosive chemicals and prolonged direct sunlight.

7. Disposal

Dispose of the product responsibly in accordance with local waste regulations. Aluminium and stainless steel components should be recycled where suitable facilities exist.

Foxy Edge (10 mm, 15 mm & 20 mm)

1. Product Overview

Foxy Edge is a portable lightweight aluminium finger training edge designed for controlled single-hand grip and finger strength training. The product range includes 10 mm, 15 mm and 20 mm edge variants.

2. Intended Use

The Foxy Edge is intended for portable finger strength and grip training by climbers and similar users.

The product is designed for controlled training exercises only and is not intended for life-safety, fall protection or load-bearing applications.

3. Safety Information

  • Inspect the product before every use.
  • Do not use if cracked, bent, excessively worn or otherwise damaged.
  • Use only for its intended purpose.
  • Do not modify the product.
  • Children should only use the product under appropriate adult supervision.
  • Stop using the product immediately if damage is identified.
  • Users are responsible for selecting an appropriate training load for their ability.

4. Foreseeable Misuse

  • Not for personal fall protection.
  • Not for use as a climbing anchor.
  • Not for lifting people or equipment.
  • Do not subject the product to dynamic shock loading.
  • Do not continue using the product after impact damage.

5. Inspection Before Use

Before every training session check for:

  • Cracks or fractures.
  • Bending or permanent deformation.
  • Sharp edges or burrs.
  • Damage to the attachment loop.
  • Signs of excessive wear.

Do not use if any damage is found.

6. Cleaning & Maintenance

Clean using warm water and mild detergent.

Dry thoroughly before storage.

Do not use abrasive cleaners or aggressive chemicals.

If exposed to salt water or corrosive environments, clean and dry the product immediately.

7. Storage

Store indoors in a clean, dry environment away from excessive heat, corrosive chemicals and prolonged direct sunlight.

8. Disposal

Dispose of the product responsibly in accordance with local recycling and waste regulations. Aluminium components should be recycled where suitable facilities exist.

Foxy Holds (8 mm, 10 mm, 12 mm, 14 mm & 20 mm)

1. Product Overview

Foxy Holds are precision CNC-machined aluminium climbing holds designed for installation on suitably constructed climbing walls for climbing and climbing training activities.

2. Intended Use

Foxy Holds are intended for use on indoor or outdoor climbing walls that are structurally suitable for climbing.

The products are designed to be securely fixed using compatible M5 fixing hardware.

They are intended for recreational and training use only.

3. Installation

Installation should only be carried out by a competent person familiar with climbing wall construction.

Before installation:

  • Inspect the climbing hold for damage.
  • Ensure the climbing wall is structurally suitable.
  • Use only compatible M5 fixing hardware.
  • Ensure the fixing hardware is suitable for the wall construction.

After installation:

  • Confirm the hold cannot rotate or move.
  • Inspect all fixings before the wall is used.

4. Safety Information

  • Read these instructions before installation and use.
  • Install only on structurally suitable climbing walls.
  • Use compatible M5 fixing hardware.
  • Incorrect installation may result in product failure and serious injury.
  • Inspect holds and fixings before every use.
  • Do not use damaged climbing holds.
  • Do not modify, drill or machine the product.
  • Replace damaged or excessively worn holds immediately.
  • Children should always be supervised while climbing.
  • Climbing activities involve an inherent risk of injury.

5. Inspection Before Use

Before each climbing session check that:

  • The hold is securely fixed.
  • There is no movement or rotation.
  • The fixing hardware remains tight.
  • The hold is free from visible damage.
  • There are no cracks, excessive wear or corrosion.

Do not use the product if any defect is identified.

6. Cleaning & Maintenance

Clean using:

  • Warm water.
  • Mild detergent.
  • A soft cloth or soft brush.

Do not use:

  • Strong acids.
  • Strong alkalis.
  • Abrasive cleaning materials.

Dry thoroughly before reuse.

7. Storage

Store in a clean, dry location.

Avoid unnecessary impacts during storage or transport.

Inspect products before installation if they have been stored for extended periods.

8. Disposal

Dispose of the product responsibly in accordance with local waste regulations. Aluminium components should be recycled where suitable recycling facilities exist. Dispose of all packaging in accordance with local recycling requirements.

 Foxy Hold Backer

1. Product Overview

The Foxy Hold Backer is a non-load-bearing accessory designed exclusively for use with compatible Foxy climbing holds. Each set includes three pairs of Hold Backers providing 10°, 20° and 30° angle adjustments, allowing users to modify the orientation and effective edge depth of compatible holds.

2. Intended Use

The Foxy Hold Backer is intended solely for use with compatible Foxy climbing holds.

It is designed to:

  • Modify the installation angle of compatible holds.
  • Alter the effective edge depth for climbing training.
  • Provide progressive training options.

The Hold Backer is not a climbing hold and must never be used independently.

3. Installation

Installation should only be carried out by a competent person.

  1. Select the required Hold Backer angle (10°, 20° or 30°).
  2. Position one Hold Backer behind each side of the climbing hold.
  3. Align the fixing holes with the climbing hold and climbing wall.
  4. Install using the recommended fixing hardware.
  5. Tighten all fixings securely.
  6. Check the installation before climbing.

4. Safety Information

  • Use only with compatible Foxy climbing holds.
  • Do not use as a standalone climbing hold.
  • Inspect the Hold Backers before every installation.
  • Do not use if cracked, damaged, deformed or excessively worn.
  • Ensure the climbing hold is securely installed before use.
  • Indoor use only.
  • Do not modify the product.

5. Inspection Before Use

Before each installation, check for:

  • Cracks.
  • Deformation.
  • Excessive wear.
  • Print damage.
  • Loose fit.

Replace the Hold Backers immediately if any damage is identified.

6. Cleaning & Maintenance

Clean using warm water and a mild detergent.

Do not use abrasive cleaners or strong solvents.

Allow the product to dry completely before storage.

7. Storage

Store in a clean, dry environment away from:

  • Direct sunlight.
  • Excessive heat.
  • Moisture.

8. Disposal

Dispose of the product responsibly in accordance with local waste regulations. Recycle as plastic where suitable facilities exist.